Lunamoon PREMIUM BUILDER GEL No. 9 (15-50ml)

Classic Premium Extension Gel – a polymeric light-curing material that, due to its strength, allows for a significant extension of the nail plate. It contains photoinitiators that activate the polymerization process using UV light at a specific wavelength.

Properties:

• Acid-free.

• Shock-absorbing, does not break upon impact.

• Medium consistency.

• Medium pigmentation, covers the free edge.

• Suitable for the "extension without filing" technique.

• Suitable for "extension using upper forms".

• Does not cause a burning sensation in the lamp.

• Becomes thicker in the cold and thinner in the heat.

• Thixotropic – becomes more fluid when the brush is moved.

• Can be additionally warmed up to make the gel more fluid.

• Hard at a thickness of 1 mm. At a thickness of less than 1 mm, it may bend slightly, but this does not affect durability.

• No shrinkage and maintains the arch well.

• Strictly requires a base of Rubber Base.

• Wavelength for polymerization – 380-420 nm.

• UV/LED lamp power – 36-48W.

• Maximum layer thickness – 0.5 mm at the tip/1 mm at the apex.

• Complete polymerization – 120 seconds.

Method of application:

REINFORCEMENT:

1. Remove.

2. The nail shape is not filed, or 2 mm of length is left, which will be removed after leveling.

3. File with a 180-240 grit file without heavy pressure on the nail from above to lift the nail plate, or use a 100 grit file.

4. Perform a manicure.

5. If using removers, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Carry out two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe over it, and wipe the cuticle and side areas.

7. Use primer if desired; if the base used for the underlayer is sufficiently acidic, it is not required.

8. Apply LUNAmoon Rubber Base, preferably with a flat gel brush. Movements should be massaging. Outline all nail edges and cure under the lamp for 60 seconds.

9. Wipe off the tacky layer.

10. Leveling. When leveling with gel, keep a distance of 0.5–1 mm from the cuticle. Cure under the lamp for 60 seconds.

11. File the shape after leveling. This is necessary to create thickness at the free edge so that the free edge holds.

12. If the nail is thin, it may warp. Therefore, 1 mm of the natural nail must be filed away from the inside. This prevents the material from peeling. If the material is hard and the nail is very soft, the nail will separate from the hard material at the free edge.

13. After filing, wipe off the tacky layer and cover with gel polish.

14. Apply a top coat. Cure under the lamp for 120 seconds. Do not wipe after curing to avoid losing the shine.

CLASSIC EXTENSION:

1. Remove.

2. Shorten nail length to 1 mm and shape into a round form.

3. File with a 180-240 grit file without heavy pressure on the nail from above to lift the nail plate, or use a 100 grit file.

4. Perform a manicure.

5. If using removers, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Carry out two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe over it, and wipe the cuticle and side areas.

7. Use primer.

8. Apply LUNAmoon Rubber Base, preferably with a flat gel brush. Movements should be massaging. Outline all nail edges and cure under the lamp for 60 seconds.

9. Wipe off the tacky layer.

10. Attach the form for extending the free edge of the nail.

11. Create the shape of the artificial nail using clear gel. Cure under the lamp for 30 seconds.

12. File the free edge and adjust to the desired shape.

13. Wipe off the tacky layer and remove excess dust.

14. Apply LUNAmoon Rubber Base again to the treated areas. Cure under the lamp for 30 seconds.

15. Level with gel, cure under the lamp, and set in the first 10–15 seconds. If the gel is very sticky or contains glitter, set for the first 20 seconds.

16. Cure under the lamp for 120 seconds.

17. Wipe off the tacky layer before covering with gel polish.

18. Apply a top coat. Cure under the lamp for 120 seconds. Do not wipe after curing to avoid losing the shine.

Composition: Copolymer, Hema, Ethyi Trimethylbenzoyl Phenylphosphinate
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI77510

Product shelf life: 24 months. Once opened, do not store for longer than 18 months.

(Photo of the product on the website may differ from the actual product)

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Str. Dragana M., building 30, apartments 26 , E-Mail: shklyarskiinaz@gmail.com