Lunamoon PREMIUM BUILDER GEL No. 29 (15-30ml)
Classic Premium Extension Gel – a polymer light-curing material that, due to its strength, allows for significant extension of the nail plate. It contains photoinitiators that activate the polymerization process via UV light at a specific wavelength.
Properties:
-
Acid-free.
-
Shock-absorbing, does not break upon impact.
-
Medium consistency.
-
Medium pigmentation, covers the free edge.
-
Suitable for the "extension without filing" technique.
-
Suitable for "extension on dual forms".
-
Does not cause a burning sensation in the lamp.
-
Becomes thicker when cold, thinner when warm.
-
Thixotropic – becomes more fluid when the brush is moved.
-
Can be additionally heated to make the gel more fluid.
-
Hard at a thickness of 1 mm. At a thickness of less than 1 mm, it may bend slightly, but this does not affect durability.
-
No shrinkage and holds the arch well.
-
Requires a base of Rubber Base.
-
Polymerization wavelength – 380-420 nm.
-
UV/LED lamp power – 36-48W.
-
Maximum layer thickness – 0.5 mm at the tip / 1 mm at the apex.
-
Full polymerization – 120 seconds.
Application method:
REINFORCEMENT:
-
Removal.
-
The nail shape is not filed, or 2 mm of length is left, which is removed after leveling.
-
File with 180-240 grit without applying strong pressure to the top of the nail to lift the nail plate, or use 100 grit.
-
Perform a manicure.
-
When using removers, wash hands with soap after use.
-
Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe on it, and wipe the cuticle and lateral areas.
-
Use primer if desired; if the base used for the foundation is sufficiently acidic, it is not required.
-
It is best to apply LUNAmoon Rubber Base with a flat gel brush. Use massaging movements. Outline all nail edges and cure for 60 seconds under the lamp.
-
Wipe off the tacky layer.
-
Leveling. When leveling with gel, maintain a distance of 0.5–1 mm from the cuticle. Cure for 60 seconds under the lamp.
-
File the shape after leveling. This is necessary to create thickness at the free edge so that the free edge holds.
-
If the nail is thin, it may warp. Therefore, 1 mm of the natural nail must be filed out from underneath. This prevents material lifting. If the material is hard and the nail is very soft, the nail will detach from the hard material at the free edge.
-
After filing, wipe off the tacky layer and cover with gel polish.
-
Apply a topcoat. Cure for 120 seconds under the lamp. Do not wipe after curing to avoid losing shine.
CLASSIC EXTENSION:
-
Removal.
-
Trim the nail length to 1 mm and shape into a round form.
-
File with 180-240 grit without applying strong pressure to the top of the nail to lift the nail plate, or use 100 grit.
-
Perform a manicure.
-
When using removers, wash hands with soap after use.
-
Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe on it, and wipe the cuticle and lateral areas.
-
Use primer.
-
It is best to apply LUNAmoon Rubber Base with a flat gel brush. Use massaging movements. Outline all nail edges and cure for 60 seconds under the lamp.
-
Wipe off the tacky layer.
-
Apply the form for extending the free edge.
-
Create the shape of the artificial nail with clear gel. Cure for 30 seconds under the lamp.
-
File the free edge and adjust to the desired shape.
-
Wipe off the tacky layer and remove excess dust.
-
Apply LUNAmoon Rubber Base again to the treated areas. Cure for 30 seconds under the lamp.
-
Level with gel, cure under the lamp, and set for the first 10–15 seconds. If the gel is very sticky or contains glitter, set for the first 20 seconds.
-
Cure for 120 seconds under the lamp.
-
Wipe off the tacky layer before applying gel polish.
-
Apply a topcoat. Cure for 120 seconds under the lamp. Do not wipe after curing to avoid losing shine.
Composition: Copolymer, Hema, Ethyl Trimethylbenzoyl Phenylphosphinate
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI 77510
Product shelf life: 24 months. Once opened, do not store for longer than 18 months.
(Product photo on the website may differ from the actual product)
Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY", 79049, Ukraine, Lviv, Dragana M. St., building 30, apt 26, E-mail: shklyarskiinaz@gmail.com
Shipping & Delivery Time:
Orders are generally shipped on the same or the next business day after full payment has been received. The delivery time within Germany is approx. 2–4 business days, and within the EU approx. 5–8 business days.
Return:
A return is possible within the scope of the statutory right of withdrawal within 14 days of receipt of the goods. The goods should be returned in full and, if possible, unused.
For hygienic reasons, opened or used products may be excluded from return, provided that the legal requirements for this are met.