Lunamoon Light Acrygel No. 3 (13-30ml)

LIQUID GEL LIGHT ACRYGEL – an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60-80% acrylic copolymer (the main ingredient of polygel) and a small amount of hydroxyethyl methacrylate (HEMA, approx. 20-30%), the main ingredient of base coatings. Such a gel can completely replace the base.

Properties:

• Polymerization wavelength – 365–405 nm.

• UV/LED lamp power – 36–48 W.

• Permissible layer thickness – 0.5 mm at the nail edge, 1 mm at the apex.

• Acid-free, medium consistency.

• Medium pigmentation, covers the free edge.

• Full polymerization – 120 seconds.

• Suitable only for strengthening and extending nails.

• Good cushioning properties.

• When strengthening with this gel, the natural nail must be filed.

• Requires a Rubber Base underlay.

• Can be additionally warmed to achieve a more liquid consistency.

Application method:

STRENGTHENING:

1. Removal:
   Do not file the nail shape or leave 2 mm of length to be removed after leveling.
   File from above with a file (180-240 grit) without strong pressure to raise the nail plate scales, or use a buffer (100 grit).

2. Manicure:
   If using removers, wash your hands with soap after application.
   Degrease the nail with Nail Prep. Apply twice. Use 4 wipes for this (1 wipe for 5 fingers).
   First step: Wipe the nail surface.
   Second step: Take an orange stick, wrap a wipe around it, and wipe the cuticle zone and nail folds.

3. Primer (optional):
   If desired, use a primer. If the base for the underlay is sufficiently acidic, the primer is not required.
   Apply the Rubber Base LUNAmoon with a flat gel brush. The movements should be scrubbing. Trace all nail folds and cure under the lamp for 60 seconds.

4. Leveling:
   When leveling with gel, leave a gap of 0.5–1 mm from the cuticle. Cure under the lamp for 60 seconds.

5. Filing:
   File the shape after leveling to create a thickness at the edge of the nail that will hold the free edge.
   If the nail was thin, it might warp. Therefore, be sure to file 1 mm of natural nail from the inside to prevent material lifting. If the material is hard and the nail is very soft, the natural nail might lift from the hard material at the free edge.

6. After filing:
   Remove the stickiness and cover the nail with gel polish.
   Cover with a topcoat and cure under the lamp for 120 seconds. Do not wipe after curing, as the shine might be lost.

CLASSIC EXTENSION:

1. Removal:
   Shorten the nail length to 1 mm and give the nail a round shape.
   File from above with a file (180-240 grit) without strong pressure to raise the nail plate scales, or use a buffer (100 grit).

2. Manicure:
   If using removers, wash your hands with soap after application.
   Degrease the nail with Nail Prep. Apply twice. Use 4 wipes for this (1 wipe for 5 fingers).
   First step: Wipe the nail surface.
   Second step: Take an orange stick, wrap a wipe around it, and wipe the cuticle zone and nail folds.

3. Primer:
   Use the primer.

4. Underlay with Rubber Base LUNAmoon:
   Apply the Rubber Base LUNAmoon with a flat gel brush. The movements should be scrubbing. Trace all nail folds and cure under the lamp for 60 seconds.
   Remove the stickiness.

5. Form construction:
   Apply the form for the extension of the free edge of the nail.
   Build the shape of the artificial nail with clear gel. Cure for 30 seconds.
   File the free edge and give it the desired shape.
   Wipe off the stickiness and remove excess dust.
   Go over the treated areas again with Rubber Base LUNAmoon. Cure for 30 seconds.

6. Leveling with gel:
   When applying the gel, hold the nail in the lamp for 10–15 seconds so that it adheres. If the gel is very sticky or glittery, hold the nail in the lamp for 20 seconds.
   Cure completely under the lamp for 120 seconds.

7. After curing:
   Remove the stickiness and cover the nail with gel polish.
   Cover with a topcoat and cure under the lamp for 120 seconds. Do not wipe after curing, as the shine might be lost.

(The product image on the website may differ from the actual product.)

Composition: Acrylates Copolymer, Hema, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Dragana M. St., building 30, apt. 26 , E-mail: shklyarskiinaz@gmail.com