Lunamoon Diamond Gel No. 4 15ml

Classic Diamond builder gel is a polymer, light-curing material that, thanks to its strength, allows for a significant extension of the nail plate. It contains photoinitiators that trigger the polymerization process under UV light of a specific wavelength.

Features:

• Acid-free

• Shock-absorbing, does not break upon impact

• Medium consistency

• Medium pigmentation, covers the free edge of the nail

• Suitable for the "extension without filing" technique

• Suitable for extension with "Dual Forms"

• Does not burn in the lamp

• Becomes thicker in the cold and thinner in the heat

• Thixotropic – becomes more fluid when brushed

• Can be additionally warmed to become more fluid

• Hard at a layer thickness of 1 mm. Slightly flexible at less than 1 mm without compromising durability

• No shrinkage, holds the C-curve well

• Requires a Rubber Base as a base layer

• Curing wavelength: 365–405 nm

• UV/LED lamp power: 36–48W

• Recommended layer thickness: 0.5 mm at the tip / 1 mm at the apex

• Full cure: 120 seconds

Application method:

REINFORCEMENT:

1. Remove old coating

2. Do not file the nail shape or leave 2 mm of length, which will be removed after building

3. Rouge the surface with a 220-grit file without applying pressure, or use a 100-grit buffer

4. Perform a manicure

5. If removers are used, wash hands with soap

6. Degrease the nail with LUNAmoon Nail Prep. Perform two passes using 4 cellulose pads (1 pad for 5 fingers). First clean the surface, then use a wooden stick and a pad to clean the nail edges and cuticles

7. Use primer as desired – not necessary if using a sufficiently acidic base

8. Apply LUNAmoon Rubber Base using a flat gel brush, paint all edges, cure for 60 seconds

9. Remove the dispersion layer

10. Build with gel, leaving a 0.5–1 mm gap to the cuticle. Cure for 60 seconds

11. File the shape after building to reinforce the nail tip

12. Thin nails: file out 1 mm of the natural nail from underneath to prevent lifting

13. Remove the dispersion layer and cover with color polish

14. Apply top coat, cure for 120 seconds. Do not wipe off afterwards to maintain the shine

CLASSIC EXTENSION:

1. Remove old coating

2. Shorten the nail to 1 mm and file into a round shape

3. Rouge with a 220-grit file or 100-grit buffer

4. Perform a manicure

5. If removers are used, wash hands with soap

6. Degrease the nail with LUNAmoon Nail Prep – as described above

7. Use LUNAmoon Primer

8. Apply Rubber Base with a flat brush, paint all edges, cure for 60 seconds

9. Remove the dispersion layer

10. Apply the form for the free edge of the nail

11. Apply transparent gel for the extension, cure for 30 seconds

12. File the shape and finish shaping

13. Wipe off the dispersion layer and remove dust

14. Apply Rubber Base again to the treated areas, cure for 30 seconds

15. Build with gel, place in the lamp and pinch after 10–15 seconds. For sticky gel or glitter, pinch after 20 seconds

16. Cure for another 120 seconds

17. Remove the dispersion layer

18. Apply color polish

19. Apply top coat, cure for 120 seconds. Do not wipe off afterwards to maintain the shine

Product shelf life: 24 months. Once opened, do not store for longer than 18 months.

(The product photo on the website may differ from the original.)

Manufacturer in accordance with GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Str. Dragana M., building 30, apartments 26 , E-Mail: shklyarskiinaz@gmail.com