Lunamoon Diamond Gel no. 1 15ml
Classic Diamond builder gel is a polymeric, light-curing material that, thanks to its strength, allows for significant lengthening of the nail plate. It contains photoinitiators that trigger the polymerization process under UV light of a specific wavelength.
Special features:
-
Acid-free
-
Shock-absorbing, does not break upon impact
-
Medium consistency
-
Medium pigmentation, covers the free edge of the nail
-
Suitable for the "extension without filing" technique
-
Suitable for extension with "dual forms"
-
No burning sensation in the lamp
-
Becomes thicker in the cold and thinner in the heat
-
Thixotropic – becomes more fluid with brush strokes
-
Can be additionally heated to become more fluid
-
Hard at a layer thickness of 1 mm. Slightly flexible at less than 1 mm without compromising durability
-
No shrinkage, holds the C-curve well
-
Requires a rubber base as a mandatory foundation
-
Curing wavelength: 365–405 nm
-
UV/LED lamp power: 36–48W
-
Recommended layer thickness: 0.5 mm at the tip / 1 mm at the apex
-
Full cure: 120 seconds
Method of application:
REINFORCEMENT:
-
Remove the old coating
-
Do not file the nail shape or leave 2 mm of length that will be removed after building
-
Rough up the surface with a 220-grit file without applying pressure or use a 100-grit buffer
-
Perform a manicure
-
If using removers, wash hands with soap
-
Degrease the nail with LUNAmoon Nail Prep. Two passes with 4 lint-free wipes (1 wipe per 5 fingers). Clean the surface first, then use a wooden stick and wipe to clean the nail edges and cuticle area
-
Use primer as desired – not necessary if using a sufficiently acidic base
-
Apply LUNAmoon Rubber Base with a flat gel brush, paint all edges, cure for 60 seconds
-
Remove the dispersion layer
-
Build with gel, leaving 0.5–1 mm distance from the cuticle. Cure for 60 seconds
-
File the shape after building to reinforce the nail tip
-
Thin nails: file out 1 mm of the natural nail from underneath to prevent lifting
-
Remove the dispersion layer and cover with color polish
-
Apply top coat, cure for 120 seconds. Do not wipe afterward to preserve the shine