Lunamoon Candy Gel No. 3 15ml
Candy color gel for nail extension is a polymeric, light-curing material that allows for a significant extension of the nail plate due to its strength. It contains photoinitiators that trigger the polymerization process under UV light of a specific wavelength.
Features:
-
Acid-free.
-
Shock-absorbing, does not break upon impact.
-
Medium consistency.
-
Medium pigmentation, covers the free edge of the nail.
-
Suitable for the "extension without filing" technique.
-
Suitable for extension with "dual forms".
-
Does not cause a burning sensation in the lamp.
-
Becomes thicker in the cold and thinner in the heat.
-
Thixotropic – becomes more fluid when brushed.
-
Can be additionally warmed to make it more fluid.
-
Hard at a layer thickness of 1 mm. Slightly flexible at less than 1 mm without compromising durability.
-
No shrinkage, holds the C-curve well.
-
Requires a Rubber Base as a foundation.
-
Curing wavelength: 365–405 nm.
-
UV/LED lamp power: 36–48W.
-
Recommended layer thickness: 0.5 mm at the tip / 1 mm at the apex.
-
Full curing: 120 seconds.
Application method:
REINFORCEMENT:
-
Remove the old coating.
-
Do not file the nail shape, or leave 2 mm of length that will be removed after construction.
-
Rough up the surface with a 220-grit file without pressure, or use a 100-grit buffer.
-
Perform a manicure.
-
If removers are used, wash hands with soap.
-
Degrease the nail with LUNAmoon Nail Prep. Use two passes with 4 lint-free wipes (1 wipe per 5 fingers). First, clean the surface, then use a wooden stick and wipe to clean the nail edges and cuticle area.
-
Use primer as desired – not necessary if using a sufficiently acidic base.
-
Apply LUNAmoon Rubber Base with a flat gel brush, cover all edges, and cure for 60 seconds.
-
Remove the dispersion layer.
-
Construct with gel, leaving a 0.5–1 mm distance from the cuticle. Cure for 60 seconds.
-
File the shape after construction to strengthen the nail tip.
-
Thin nails: File away 1 mm of the natural nail from underneath to prevent lifting.
-
Remove the dispersion layer and apply colored polish.
-
Apply Top Coat and cure for 120 seconds. Do not wipe afterwards to maintain the shine.