Lunamoon PREMIUM BUILDER GEL No. 27 (15-30ml)

Classic Premium Extension Gel – a polymer light-curing material that, due to its strength, allows for a significant extension of the nail plate. It contains photoinitiators that activate the polymerization process via UV light at a specific wavelength.

Features:

• Acid-free.

• Shock-absorbing, does not break upon impact.

• Medium consistency.

• Medium pigmentation, covers the free edge.

• Suitable for the “extension without filing” technique.

• Suitable for “extension using dual forms”.

• Does not cause a burning sensation in the lamp.

• Becomes thicker in the cold and thinner in the heat.

• Thixotropic – becomes more fluid when the brush moves.

• Can be additionally heated to make the gel more fluid.

• Hard at a thickness of 1 mm. At a thickness of less than 1 mm, it may flex slightly, which does not affect durability.

• No shrinkage and holds the arch well.

• Requires a Rubber Base undercoat.

• Polymerization wavelength – 380-420 nm.

• UV/LED lamp power – 36-48W.

• Maximum layer thickness – 0.5 mm at the tip/1 mm at the apex.

• Full polymerization – 120 seconds.

Application method:

REINFORCEMENT:

1. Removal.

2. The nail shape is not filed, or 2 mm of length is left, which is removed after leveling.

3. File with a 180-240 grit file without heavy pressure on the nail from above to lift the nail plate, or use a 100 grit file.

4. Perform a manicure.

5. If using removers, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe on it, and wipe the cuticle and side areas.

7. Use primer if desired; if the base for the undercoat is sufficiently acidic, it is not required.

8. Apply the LUNAmoon Rubber Base, preferably with a flat gel brush. Use massaging movements. Outline all nail edges and cure for 60 seconds under the lamp.

9. Wipe off the sticky layer.

10. Leveling. When leveling with gel, keep a distance of 0.5–1 mm from the cuticle. Cure for 60 seconds under the lamp.

11. File the shape after leveling. This is necessary to create thickness at the free edge so that the free edge holds.

12. If the nail is thin, it may warp. Therefore, 1 mm of the natural nail must be filed away from underneath. This prevents the material from lifting. If the material is hard and the nail is very soft, the nail will separate from the hard material at the free edge.

13. After filing, wipe off the sticky layer and cover with gel polish.

14. Apply a topcoat. Cure for 120 seconds under the lamp. Do not wipe after curing to avoid losing the shine.

CLASSIC EXTENSION:

1. Removal.

2. Shorten the nail length to 1 mm and shape into a round form.

3. File with a 180-240 grit file without heavy pressure on the nail from above to lift the nail plate, or use a 100 grit file.

4. Perform a manicure.

5. If using removers, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe on it, and wipe the cuticle and side areas.

7. Use primer.

8. Apply the LUNAmoon Rubber Base, preferably with a flat gel brush. Use massaging movements. Outline all nail edges and cure for 60 seconds under the lamp.

9. Wipe off the sticky layer.

10. Attach the form for extending the free edge.

11. Create the shape of the artificial nail using clear gel. Cure for 30 seconds under the lamp.

12. File the free edge and adjust to the desired shape.

13. Wipe off the sticky layer and remove excess dust.

14. Apply LUNAmoon Rubber Base again to the treated areas. Cure for 30 seconds under the lamp.

15. Level with gel, cure under the lamp, and fix within the first 10–15 seconds. If the gel is very sticky or contains glitter, fix within the first 20 seconds.

16. Cure for 120 seconds under the lamp.

17. Wipe off the sticky layer before covering with gel polish.

18. Apply a topcoat. Cure for 120 seconds under the lamp. Do not wipe after curing to avoid losing the shine.

Composition: Copolymer, Hema, Ethyi Trimethylbenzoyl Phenylphosphinate
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI77510

Shelf life of the product: 24 months. Once opened, do not store for longer than 18 months.

(Product photo on the website may differ from the actual product)

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Str. Dragana M., building 30, apartments 26 , E-Mail: shklyarskiinaz@gmail.com