Lunamoon PREMIUM BUILDER GEL No. 25 (15-50ml)

Classic Premium Extension Gel – a polymeric light-curing material that, due to its strength, allows for a significant extension of the nail plate. It contains photoinitiators that activate the polymerization process via UV light at a specific wavelength.

Properties:

• Acid-free.

• Shock-absorbing, does not break upon impact.

• Medium consistency.

• Medium pigmentation, covers the free edge.

• Suitable for the "extension without filing" technique.

• Suitable for "extension on upper forms".

• Does not cause a burning sensation in the lamp.

• Becomes thicker in cold temperatures and thinner in warm temperatures.

• Thixotropic – becomes more fluid when the brush is moved.

• Can be additionally heated to make the gel more fluid.

• Hard at a thickness of 1 mm. At a thickness of less than 1 mm, it may bend slightly, but this does not affect durability.

• No shrinkage and maintains the arch well.

• Requires a base coat of Rubber Base.

• Polymerization wavelength – 380-420 nm.

• UV/LED lamp power – 36-48W.

• Maximum layer thickness – 0.5 mm at the tip / 1 mm at the apex.

• Full polymerization – 120 seconds.

Application method:

REINFORCEMENT:

1. Remove.

2. The nail shape is not filed, or 2 mm of length is left, which is removed after leveling.

3. File with a 180-240 grit file without applying heavy pressure to the nail from above to lift the nail plate, or use a 100 grit file.

4. Perform a manicure.

5. When using removers, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe over it, and wipe the cuticle and side areas.

7. Use primer if desired; if the base is sufficiently acidic for the undercoat, it is not required.

8. Apply LUNAmoon Rubber Base, preferably with a flat gel brush. Movements should be massaging. Outline all nail edges and cure under the lamp for 60 seconds.

9. Wipe off the sticky layer.

10. Leveling. When leveling with gel, keep a distance of 0.5–1 mm from the cuticle. Cure under the lamp for 60 seconds.

11. File the shape after leveling. This is necessary to create thickness at the free edge so that the free edge holds.

12. If the nail is thin, it may warp. Therefore, 1 mm of the natural nail must be filed out from underneath. This prevents the material from lifting. If the material is hard and the nail is very soft, the nail will separate from the solid material at the free edge.

13. After filing, wipe off the sticky layer and cover with gel polish.

14. Cover with a topcoat. Cure under the lamp for 120 seconds. Do not wipe after curing to avoid losing the shine.

CLASSIC EXTENSION:

1. Remove.

2. Trim the nail length to 1 mm and shape into a round form.

3. File with a 180-240 grit file without applying heavy pressure to the nail from above to lift the nail plate, or use a 100 grit file.

4. Perform a manicure.

5. When using removers, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe over it, and wipe the cuticle and side areas.

7. Use primer.

8. Apply LUNAmoon Rubber Base, preferably with a flat gel brush. Movements should be massaging. Outline all nail edges and cure under the lamp for 60 seconds.

9. Wipe off the sticky layer.

10. Attach the form for extending the free edge of the nail.

11. Apply the shape of the artificial nail with clear gel. Cure under the lamp for 30 seconds.

12. File the free edge and adjust to the desired shape.

13. Wipe off the sticky layer and remove excess dust.

14. Apply LUNAmoon Rubber Base again to the treated areas. Cure under the lamp for 30 seconds.

15. Level with gel, cure under the lamp, and set for the first 10–15 seconds. If the gel is very sticky or contains glitter, set for the first 20 seconds.

16. Cure under the lamp for 120 seconds.

17. Wipe off the sticky layer before covering with gel polish.

18. Cover with a topcoat. Cure under the lamp for 120 seconds. Do not wipe after curing to avoid losing the shine.

Composition: Copolymer, Hema, Ethyl Trimethylbenzoyl Phenylphosphinate
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI77510

Product shelf life: 24 months. Once opened, do not store for longer than 18 months.

(Photo of the product on the website may differ from the actual product)

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Dragana M. St., building 30, apartments 26 , E-Mail: shklyarskiinaz@gmail.com