Lunamoon Light Acrygel No. 28 (13-30ml)

LIQUID GEL LIGHT ACRYGEL – an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60-80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate (HEMA, approx. 20-30%), the main component of base coatings. Such a gel can completely replace a base.

Properties:

• Polymerization wavelength – 365–405 nm.

• UV/LED lamp power – 36–48 W.

• Permissible layer thickness – 0.5 mm at the nail edge, 1 mm at the apex.

• Acid-free, medium consistency.

• Medium pigmentation, covers the free edge.

• Full polymerization – 120 seconds.

• Suitable only for strengthening and extending nails.

• Good cushioning properties.

• When strengthening with this gel, the natural nail must be filed.

• Requires a rubber base underlay.

• Can be additionally warmed up to achieve a more liquid consistency.

Application method:

STRENGTHENING:

1. Removal:
   Do not file the nail shape, or leave 2 mm of length to be removed after leveling.
   File from the top with a nail file (180-240 grit) without heavy pressure to lift the scales of the nail plate, or use a buffer (100 grit).

2. Manicure:
   If using removers, wash your hands with soap after application.
   Degrease the nail with Nail Prep. Perform two applications. Use 4 wipes for this (1 wipe for 5 fingers).
   First step: Wipe the nail surface.
   Second step: Take an orange wood stick, wrap a wipe around it, and wipe the cuticle area and nail folds.

3. Primer (optional):
   Use a primer if desired. If the base used for the underlay is sufficiently acidic, a primer is not necessary.
   Apply the LUNAmoon rubber base with a flat gel brush. The movements should be scrubbing. Trace all nail folds and cure under the lamp for 60 seconds.

4. Leveling:
   When leveling with gel, leave a gap of 0.5–1 mm from the cuticle. Cure under the lamp for 60 seconds.

5. Filing:
   File the shape after leveling to create a thickness at the edge of the nail that supports the free edge.
   If the nail was thin, it may warp. Therefore, be sure to file 1 mm of the natural nail from the underside to prevent material detachment. If the material is hard and the nail is very soft, the natural nail could detach from the firm material at the free edge.

6. After filing:
   Remove the tacky layer and cover the nail with a gel polish.
   Cover with a top coat and cure under the lamp for 120 seconds. Do not wipe after curing, as the shine might be lost.

CLASSIC EXTENSION:

1. Removal:
   Shorten the nail length to 1 mm and shape the nail round.
   File from the top with a nail file (180-240 grit) without heavy pressure to lift the scales of the nail plate, or use a buffer (100 grit).

2. Manicure:
   If using removers, wash your hands with soap after application.
   Degrease the nail with Nail Prep. Perform two applications. Use 4 wipes for this (1 wipe for 5 fingers).
   First step: Wipe the nail surface.
   Second step: Take an orange wood stick, wrap a wipe around it, and wipe the cuticle area and nail folds.

3. Primer:
   Use the primer.

4. Underlay with LUNAmoon rubber base:
   Apply the LUNAmoon rubber base with a flat gel brush. The movements should be scrubbing. Trace all nail folds and cure under the lamp for 60 seconds.
   Remove the tacky layer.

5. Form construction:
   Apply the form to extend the free edge of the nail.
   Build the artificial nail shape with clear gel. Cure for 30 seconds.
   File the free edge and shape as desired.
   Wipe off the tacky layer and remove excess dust.
   Go over the treated areas again with LUNAmoon rubber base. Cure for 30 seconds.

6. Leveling with gel:
   When applying the gel, keep the nail in the lamp for 10–15 seconds so it adheres. If the gel is very tacky or contains glitter, keep the nail in the lamp for 20 seconds.
   Cure completely under the lamp for 120 seconds.

7. After curing:
   Remove the tacky layer and cover the nail with a gel polish.
   Cover with a top coat and cure under the lamp for 120 seconds. Do not wipe after curing, as the shine might be lost.

(The product image on the website may differ from the actual product.)

Composition: Acrylates Copolymer, Hema, Ethyl Trimethylbenzoyl Phenyiphosphinate Hydroxycyclohexyl Phenyl

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Dragana M. St., building 30, apartment 26, E-Mail: shklyarskiinaz@gmail.com