Lunamoon Diamond Gel No. 7 15ml

Classic building gel Diamond is a polymer, light-curing material that, thanks to its strength, allows for a significant extension of the nail plate. It contains photoinitiators that trigger the polymerization process under UV light of a specific wavelength.

Features:

• Acid-free

• Shock-absorbing, does not break upon impact

• Medium consistency

• Medium pigmentation, covers the free nail edge

• Suitable for the "extension without filing" technique

• Suitable for extension with "dual forms"

• No burning in the lamp

• Becomes thicker in the cold, thinner in the heat

• Thixotropic – becomes more fluid when brushed

• Can be additionally heated to become more fluid

• Hard at a layer thickness of 1 mm. Slightly flexible at less than 1 mm without compromising durability

• No shrinking, holds the C-curve well

• Requires a rubber base as a mandatory foundation

• Curing wavelength: 365–405 nm

• UV/LED lamp power: 36–48W

• Recommended layer thickness: 0.5 mm at the tip / 1 mm at the apex

• Full curing: 120 seconds

Application method:

STRENGTHENING:

1. Remove the old coating

2. Do not file the nail shape or leave 2 mm of length that will be removed after building

3. Roughen the surface with a 220-grit file without pressure or use a 100-grit buffer

4. Perform a manicure

5. If using removers, wash hands with soap

6. Degrease the nail with Nail Prep LUNAmoon. Two passes with 4 cellulose pads (1 pad for 5 fingers). First, clean the surface, then use a wooden stick and pad to clean the nail edges and cuticles

7. Use primer as desired – not necessary if the base is sufficiently acidic

8. Work in Rubber Base LUNAmoon with a flat gel brush, paint all edges, cure for 60 sec.

9. Remove the dispersion layer

10. Build with gel, 0.5–1 mm away from the cuticle. Cure for 60 sec.

11. File the shape after building to reinforce the nail tip

12. Thin nails: File out 1 mm of natural nail from underneath to prevent lifting

13. Remove the dispersion layer and coat with color polish

14. Apply top coat, cure for 120 sec. Do not wipe afterwards to maintain shine

CLASSIC EXTENSION:

1. Remove the old coating

2. Shorten the nail to 1 mm and file round

3. Roughen with a 220-grit file or 100-grit buffer

4. Perform a manicure

5. If using removers, wash hands with soap

6. Degrease the nail with Nail Prep LUNAmoon – as described above

7. Use Primer LUNAmoon

8. Work in Rubber Base with a flat brush, paint all edges, cure for 60 sec.

9. Remove the dispersion layer

10. Apply the form for the free nail edge

11. Transparent gel build-up for the extension, cure for 30 sec.

12. File the shape and form

13. Wipe the dispersion layer and remove dust

14. Apply Rubber Base again to the treated areas, cure for 30 sec.

15. Build with gel, place in the lamp and pinch after 10–15 seconds. For sticky gel or glitter, pinch after 20 sec.

16. Cure for another 120 sec.

17. Remove the dispersion layer

18. Apply color polish

19. Apply top coat, cure for 120 sec. Do not wipe afterwards to maintain shine

Product shelf life: 24 months. Do not store for longer than 18 months once opened.

(The product photo on the website may differ from the original.)

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Str. Dragana M., building 30, apartments 26 , E-Mail: shklyarskiinaz@gmail.com