Lunamoon Light Acrygel No. 40 13ml

FLÜSSIGER GEL LIGHT ACRYGEL – an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60-80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate (HEMA, approx. 20-30%), the main component of base coatings. Such a gel can completely replace a base.

Properties:

• Polymerization wavelength – 365–405 nm.

• UV/LED lamp power – 36–48 W.

• Permissible layer thickness – 0.5 mm at the nail edge, 1 mm at the apex.

• Acid-free, medium consistency.

• Medium pigmentation, covers the free edge.

• Full polymerization – 120 seconds.

• Suitable only for strengthening and extending nails.

• Good cushioning properties.

• When strengthening with this gel, the natural nail must be filed.

• Requires a rubber base layer.

• Can be additionally warmed to achieve a more fluid consistency.

Application method:

STRENGTHENING:

1. Removal:
   Do not file the nail shape or leave 2 mm of length to be removed after leveling.
   File the top of the nail with a file (180-240 grit) without strong pressure to lift the scales of the nail plate, or use a buffer (100 grit).

2. Manicure:
   If using removers, wash your hands with soap after application.
   Degrease the nail with Nail Prep. Perform two applications. Use 4 wipes for this (1 wipe for 5 fingers).
   First step: Wipe the nail surface.
   Second step: Take an orange wood stick, place a wipe on it, and wipe the cuticle area and the nail folds.

3. Primer (optional):
   If desired, use a primer. If the base used for the underlayer is sufficiently acidic, a primer is not required.
   Apply the LUNAmoon Rubber Base with a flat gel brush. Use rubbing motions. Trace all nail folds and cure under the lamp for 60 seconds.

4. Leveling:
   When leveling with gel, leave a gap of 0.5–1 mm from the cuticle. Cure under the lamp for 60 seconds.

5. Filing:
   File the shape after leveling to create a thickness at the edge of the nail that will support the free edge.
   If the nail was thin, it may warp. Therefore, be sure to file 1 mm of natural nail from the inside to prevent lifting of the material. If the material is hard and the nail is very soft, the natural nail might separate from the rigid material at the free edge.

6. After filing:
   Remove the sticky layer and cover the nail with gel polish.
   Cover with a top coat and cure under the lamp for 120 seconds. Do not wipe after curing, as the shine might be lost.

CLASSIC EXTENSION:

1. Removal:
   Shorten the nail length to 1 mm and shape the nail into a round form.
   File the top of the nail with a file (180-240 grit) without strong pressure to lift the scales of the nail plate, or use a buffer (100 grit).

2. Manicure:
   If using removers, wash your hands with soap after application.
   Degrease the nail with Nail Prep. Perform two applications. Use 4 wipes for this (1 wipe for 5 fingers).
   First step: Wipe the nail surface.
   Second step: Take an orange wood stick, place a wipe on it, and wipe the cuticle area and the nail folds.

3. Primer:
   Use the primer.

4. Underlayer with LUNAmoon Rubber Base:
   Apply the LUNAmoon Rubber Base with a flat gel brush. Use rubbing motions. Trace all nail folds and cure under the lamp for 60 seconds.
   Remove the sticky layer.

5. Form construction:
   Attach the form for extending the free edge of the nail.
   Build the shape of the artificial nail with clear gel. Cure for 30 seconds.
   File the free edge and shape as desired.
   Wipe off the sticky layer and remove excess dust.
   Go over the treated areas again with LUNAmoon Rubber Base. Cure for 30 seconds.

6. Leveling with gel:
   When applying the gel, keep the nail in the lamp for 10–15 seconds to ensure adhesion. If the gel is very sticky or contains glitter, keep the nail in the lamp for 20 seconds.
   Cure completely under the lamp for 120 seconds.

7. After curing:
   Remove the sticky layer and cover the nail with gel polish.
   Cover with a top coat and cure under the lamp for 120 seconds. Do not wipe after curing, as the shine might be lost.

(The product image on the website may differ from the actual product.)

Composition: Acrylates Copolymer, Hema, Ethyl Trimethylbenzoyl Phenylphosphinate Hydroxycyclohexyl Phenyl

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Str. Dragana M., building 30, apartments 26 , E-Mail: shklyarskiinaz@gmail.com