Lunamoon PREMIUM BUILDER GEL No. 26 (15-50ml)

Classic Premium Extension Gel – a polymeric light-curing material that, due to its strength, allows for a significant extension of the nail plate. It contains photoinitiators that activate the polymerization process using UV light at a specific wavelength.

Properties:

• Acid-free.

• Shock-absorbent, does not break under impact.

• Medium consistency.

• Medium pigmentation, covers the free edge.

• Suitable for the "extension without filing" technique.

• Suitable for "extension on upper forms".

• Does not cause a burning sensation in the lamp.

• Becomes thicker in the cold and thinner in the heat.

• Thixotropic – becomes more liquid when the brush moves.

• Can be additionally warmed to make the gel more liquid.

• Hard at a thickness of 1 mm. At a thickness of less than 1 mm, it may bend slightly, which does not affect durability.

• No shrinkage and holds the arch well.

• Requires a base coat of Rubber Base.

• Polymerization wavelength – 380-420 nm.

• UV/LED lamp power – 36-48W.

• Maximum layer thickness – 0.5 mm at the tip / 1 mm at the apex.

• Full polymerization – 120 seconds.

Application method:

REINFORCEMENT:

1. Removal.

2. Do not file the nail shape or leave 2 mm of length to be removed after leveling.

3. File with 180-240 grit without applying strong pressure to the nail from above to lift the nail plate, or use 100 grit.

4. Perform a manicure.

5. If removers are used, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe on it, and wipe the cuticle and side areas.

7. Apply primer as desired; if the base coat is sufficiently acidic, it is not required.

8. It is best to apply the LUNAmoon Rubber Base using a flat gel brush. Use massaging movements. Trace all nail edges and cure for 60 seconds under the lamp.

9. Wipe off the dispersion layer.

10. Leveling. When leveling with gel, keep a distance of 0.5–1 mm from the cuticle. Cure for 60 seconds under the lamp.

11. File the shape after leveling. This is necessary to create thickness at the free edge so that the free edge holds.

12. If the nail is thin, it may warp. Therefore, 1 mm of the natural nail must be filed away from the inside. This prevents the material from lifting. If the material is hard and the nail is very soft, the nail will detach from the hard material at the free edge.

13. After filing, wipe off the dispersion layer and cover with gel polish.

14. Apply a top coat. Cure for 120 seconds under the lamp. After curing, do not wipe to ensure the shine is preserved.

CLASSIC EXTENSION:

1. Removal.

2. Trim nail length to 1 mm and shape into a round form.

3. File with 180-240 grit without applying strong pressure to the nail from above to lift the nail plate, or use 100 grit.

4. Perform a manicure.

5. If removers are used, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Perform two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: Wipe the nail surface. Second pass: Take an orange wood stick, place a wipe on it, and wipe the cuticle and side areas.

7. Use primer.

8. It is best to apply the LUNAmoon Rubber Base using a flat gel brush. Use massaging movements. Trace all nail edges and cure for 60 seconds under the lamp.

9. Wipe off the dispersion layer.

10. Attach the form for extending the free edge.

11. Apply the form of the artificial nail with clear gel. Cure for 30 seconds under the lamp.

12. File the free edge and adjust to the desired shape.

13. Wipe off the dispersion layer and remove excess dust.

14. Apply LUNAmoon Rubber Base again to the treated areas. Cure for 30 seconds under the lamp.

15. Level with gel, cure under the lamp, and set in the first 10–15 seconds. If the gel is very sticky or contains glitter, set for the first 20 seconds.

16. Cure for 120 seconds under the lamp.

17. Wipe off the dispersion layer before covering with gel polish.

18. Apply a top coat. Cure for 120 seconds under the lamp. After curing, do not wipe to ensure the shine is preserved.

Composition: Copolymer, Hema, Ethyi Trimethylbenzoyl Phenylphosphinate
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI 77510

Product shelf life: 24 months. Once opened, do not store for longer than 18 months.

(Product photo on the website may differ from the actual product)

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Dragana M. St., building 30, apt. 26 , E-mail: shklyarskiinaz@gmail.com