Lunamoon PREMIUM BUILDER GEL No. 20 (15-50ml)

Classic Premium Extension Gel – a polymeric light-curing material that allows for significant extension of the nail plate due to its strength. It contains photoinitiators that activate the polymerization process using UV light at a specific wavelength.

Properties:

• Acid-free.

• Shock-absorbing, does not break under impact.

• Medium consistency.

• Medium pigmentation, covers the free edge.

• Suitable for the "extension without filing" technique.

• Suitable for "extension on dual forms".

• Does not cause a burning sensation in the lamp.

• Becomes thicker in cold conditions and thinner in warm conditions.

• Thixotropic – becomes more fluid when the brush is moved.

• Can be additionally warmed to make the gel more fluid.

• Hard at a thickness of 1 mm. At a thickness of less than 1 mm, it may bend slightly, but this does not affect durability.

• No shrinkage and maintains the arch well.

• Requires a base coat of Rubber Base.

• Polymerization wavelength – 380-420 nm.

• UV/LED lamp power – 36-48W.

• Maximum layer thickness – 0.5 mm at the tip / 1 mm at the apex.

• Complete polymerization – 120 seconds.

Application method:

REINFORCEMENT:

1. Removal.

2. The nail shape is not filed, or 2 mm of length is left, which is removed after leveling.

3. File with 180-240 grit without applying heavy pressure to the nail from above to lift the nail plate, or use 100 grit.

4. Perform a manicure.

5. If removers are used, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Perform two passes. Use 4 lint-free wipes (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, wrap a wipe around it, and wipe the cuticle area and sidewalls.

7. Use primer as desired; if the base coat is sufficiently acidic, it is not required.

8. Apply LUNAmoon Rubber Base, preferably with a flat gel brush. Use massaging motions. Cover all edges of the nail and cure in the lamp for 60 seconds.

9. Wipe off the sticky layer.

10. Leveling. When leveling with gel, maintain a distance of 0.5–1 mm from the cuticle. Cure in the lamp for 60 seconds.

11. File the shape after leveling. This is necessary to create thickness at the free edge so that the free edge holds.

12. If the nail is thin, it may warp. Therefore, 1 mm of the natural nail must be filed out from underneath. This prevents material lifting. If the material is hard and the nail is very soft, the nail will separate from the hard material at the free edge.

13. After filing, wipe off the sticky layer and cover with gel polish.

14. Apply topcoat. Cure for 120 seconds in the lamp. Do not wipe after curing to avoid losing the shine.

CLASSIC EXTENSION:

1. Removal.

2. Trim the nail length to 1 mm and shape into a round form.

3. File with 180-240 grit without applying heavy pressure to the nail from above to lift the nail plate, or use 100 grit.

4. Perform a manicure.

5. If removers are used, wash hands with soap after working with them.

6. Degrease the nail with Nail Prep. Perform two passes. Use 4 lint-free wipes (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, wrap a wipe around it, and wipe the cuticle area and sidewalls.

7. Use primer.

8. Apply LUNAmoon Rubber Base, preferably with a flat gel brush. Use massaging motions. Cover all edges of the nail and cure in the lamp for 60 seconds.

9. Wipe off the sticky layer.

10. Attach the form for extending the free edge.

11. Build the shape of the artificial nail with clear gel. Cure for 30 seconds in the lamp.

12. File the free edge and adjust to the desired shape.

13. Wipe off the sticky layer and remove excess dust.

14. Apply LUNAmoon Rubber Base again to the treated areas. Cure for 30 seconds in the lamp.

15. Level with gel, cure in the lamp, and set for the first 10–15 seconds. If the gel is very sticky or contains glitter, set for the first 20 seconds.

16. Cure in the lamp for 120 seconds.

17. Wipe off the sticky layer before covering with gel polish.

18. Apply topcoat. Cure for 120 seconds in the lamp. Do not wipe after curing to avoid losing the shine.

Composition: Copolymer, Hema, Ethyi Trimethylbenzoyl Phenylphosphinate
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI77510

Product shelf life: 24 months. Do not keep open for longer than 18 months.

(Photo of the product on the website may differ from the actual product)

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY", 79049, Ukraine, Lviv, Str. Dragana M., building 30, apartments 26, E-Mail: shklyarskiinaz@gmail.com