Lunamoon Glass Builder Gel No. 8 15ml

LUNAmoon Glass Gel №1 – transparent builder gel with a glass effect

Glass Gel is a light-curing gel for nail reinforcement and extension. The transparent color effect creates a particularly beautiful, deep glass look.

The color intensity depends on the layer thickness: applied thinly, the color appears slightly transparent; with a layer of up to 2 mm, it becomes more intense while remaining transparent.

Features

• Acid-free
• Medium to slightly runny consistency
• Not sticky and easy to spread with a brush
• Very good self-leveling properties
• Does not run during modeling
• Lower risk of air bubbles during application
• Suitable for natural nail reinforcement
• Suitable for no-file modeling
• Suitable for extension with Dual Forms
• Flexible against impacts and therefore less prone to cracks
• Becomes thicker in cold temperatures and more fluid in heat
• Can be slightly warmed to make the consistency more fluid
• Does not cause intense burning in the lamp

Important

• Always requires a base layer of LUNAmoon Rubber Base
• The free edge of the nail should be at least 1 mm thick
• Pre-curing with a mini lamp: 10–15 seconds
• Recommended wavelength: 365–405 nm
• Recommended UV/LED lamp: 36–48 W
• Maximum layer thickness per cure: 2 mm
• Full cure: 120 seconds
• For material thickness over 3 mm, work in two steps with intermediate curing

Application – Reinforcement

1. Remove old material and prepare the nail plate.
2. Lightly buff the nail with a 220-grit file or a 100-grit buffer.
3. Perform a manicure and thoroughly degrease the nail.
4. Optionally use a primer.
5. Apply a thin layer of LUNAmoon Rubber Base and cure for 60 seconds.
6. Remove the dispersion layer.
7. Apply Glass Gel at a distance of 0.5–1 mm from the cuticle and level out.
8. Cure completely for 120 seconds.
9. File the shape and remove dust.
10. Apply gel polish if desired.
11. Seal with a no-wipe top coat and cure for 120 seconds.

Application – Classic Extension

1. Prepare the natural nail, perform a manicure, and degrease thoroughly.
2. Apply primer.
3. Apply a thin layer of LUNAmoon Rubber Base and cure for 60 seconds.
4. Remove the dispersion layer and place the nail form.
5. Model the free edge with Glass Gel and pre-cure for 30 seconds.
6. File the shape and remove dust.
7. Re-apply Rubber Base on the filed areas and cure for 60 seconds.
8. Model the apex with Glass Gel. After 10–15 seconds, the material can be pinched.
9. Then cure completely for 120 seconds.
10. Remove the dispersion layer and apply gel polish if desired.
11. Seal with a no-wipe top coat and cure for 120 seconds.

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate. May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI 77510.

Shelf life: 24 months. After opening, use within a maximum of 18 months.

TPO FREE

(Photo of the product on the website may differ from the actual product)

Manufacturer according to GPSR: LLC "LUNAMOON GEL COMPANY" , 79049, Ukraine, Lviv, Str. Dragana M., building 30, apartments 26 , E-Mail: shklyarskiinaz@gmail.com