Lunamoon Marker Base 5ml

BASE MARKER: Rubber base in a new marker format with a lighter formula. A modern format for perfect technique!

Rubber Base is a transparent, universal base with a liquid consistency, used as a base coat for hard materials and colored bases.

Features of the marker:

• Precise application: Controlled amount of product for even application.

• Cost-effectiveness: Efficient use of the product without unnecessary waste.

• Working speed: Natural movements, similar to holding a pen, for fast application.

Properties of the base:

• Liquid consistency (has a thinner formula than the standard LUNAmoon Rubber Base).

• Has a pH value of 3–4.

• Can cause a heat and burning sensation on damaged and very thin nails (not on healthy nails).

• Suitable as a base coat for hard materials and colored bases.

• The power of the lamp for curing the base should be 36–48 W. The lamp must be original.

• 100% adhesion with correct application technique.

• Excellent removal by both filing and soaking off with liquid.

• Hypoallergenic and has a neutral scent.

Application method:

1. Removal:
   Do not file the nail shape or leave 2 mm of length that will be removed after leveling.
   File with a file (180-240 grit) without strong pressure on the nail from above and lift the scales of the nail plate, or use a buffer (100 grit).

2. Manicure:
   If working with removers, wash your hands with soap after application.
   Degrease the nail with nail prep. Make two applications. Use 4 wipes for this (1 wipe for 5 fingers).
   First step: Wipe the nail surface.
   Second step: Take an orange wood stick, place a wipe on it and wipe the cuticle area and the nail folds.

3. Ultrabond (optional):
   If desired, apply Ultrabond. Before application, it is important to wipe the brush with a lint-free wipe to remove excess material. Apply Ultrabond with a semi-dry brush to all five fingers. Wait 1 minute for it to absorb into the nail plate.

4. Base coat with BASE MARKER Rubber Base:
   Apply the BASE MARKER Rubber Base to the nail plate and cure it under the lamp for 60 seconds.
   Remove the stickiness.

5. Leveling:
   Cover the nail as desired with a colored base or a building material. Cure under the lamp for 120 seconds.

6. Filing:
   File the shape after leveling to create a thickness at the edge of the nail that will hold the free edge.
   If the nail was thin, it may warp, so you must file 1 mm of the natural nail from the inside. This prevents the material from lifting. If the material is hard and the nail is very soft, the natural nail may detach from the hard material at the free edge.

7. After filing:
   After filing the shape, remove the stickiness and cover the nail with a thin layer of gel polish or a covering base.
   Cover with a topcoat and cure under the lamp for 120 seconds. Do not wipe after curing, as the shine could be lost.

Important:

• Do not leave the marker open. Close the cap tightly after use.

• Avoid letting UV/LED rays reach the product.

• Store the marker in a dark place, away from direct sunlight.

Product shelf life:
24 months. Do not store for longer than 12 months once opened.

(The product image on the website may differ from the actual product.)